I noticed the top of my air tube bleed assembly was cracked, so I ordered a new one online and the new one came with a screen mesh instead of the plastic top. I'm checking with Pentair to see if this is the correct replacement or did I receive the wrong part, should be part number 178583 (CCP520 installed after 11/98). I installed the one I received, but the mesh filter does not reach the bottom of the bleed valve or the top of the filter, whichever way you want to describe it. I've also noticed that I have to bleed the air in the filter every morning after the pump has run its cycle to get the filter to fill back up.
does not having the correct or cracked bleed tube assembly allow the water to drain out of the filter when the pump is turned off? I bought this house with pool a couple months ago and don't recall having to bleed the air as often. I would check it periodically and maybe there was a small puff of air that would escape. I did buy a new o-ring but have not installed it yet. The unit is 8-10years old so I'm wondering if the o-ring could be the issue or maybe I'm not putting the clamp back on correctly.
does not having the correct or cracked bleed tube assembly allow the water to drain out of the filter when the pump is turned off? I bought this house with pool a couple months ago and don't recall having to bleed the air as often. I would check it periodically and maybe there was a small puff of air that would escape. I did buy a new o-ring but have not installed it yet. The unit is 8-10years old so I'm wondering if the o-ring could be the issue or maybe I'm not putting the clamp back on correctly.