Good evening all, new to the group but here goes;
I have a Triton II (I believe TR100) sand filter. I had a leak on the filter cap so i removed the cap and replaced the rubber gasket. (The filter is about 10 years old). I lubed the new gasket up and replaced the cap but i still have leaks in about 3-4 places. The leaks are not shooting out just running down the side. No cracks in the cap that i can see. Its almost like I need to run a bead of silicone around the outside of the cap to get it from leaking. Any ideas? Thanks in advance.
I have a Triton II (I believe TR100) sand filter. I had a leak on the filter cap so i removed the cap and replaced the rubber gasket. (The filter is about 10 years old). I lubed the new gasket up and replaced the cap but i still have leaks in about 3-4 places. The leaks are not shooting out just running down the side. No cracks in the cap that i can see. Its almost like I need to run a bead of silicone around the outside of the cap to get it from leaking. Any ideas? Thanks in advance.