I looking for some programming help with the Easy Touch Panel. I would like to run pump at say 2500 rpm for so many hours while also powering Intellichor. Then run at say 1400 rpm for another 6 hours also running Intellichlor. I have a Intellflo pump with the correct speeds entered. Intellichlor is wired to the pump relay. I can get the chlorinator to run on the pool circuit but can't seem to get it to run on the other circuits or functions. I am guessing it not activating the relay Inteelichlor is connected to.
This is the only thing easytouch is used for, no spa, heater, solar or lights used.
Thanks
Tim
This is the only thing easytouch is used for, no spa, heater, solar or lights used.
Thanks
Tim