Ok.. I wasn't sure where the best spot for this post would be so I picked this thread.. I have an 18x33 semi inground pool. The pook equipment (heater, filter, pump, extra outlets, swg, etc) is located on a pad approximately 12ft away from the pool edge.. When the pool was installed the electrician bonded the pool which included running a wire around the perimeter of the pool and tying it into the skimmer, return, pool equipment. He then asked if we were installing a metal ladder to get in as it would also need to be bonded.. I informed him that we were planning on building a small platform made of composite decking.. He brushed it off as if it did not need bonding.. Well the "platform" idea turned into a full deck build.. I looked around online and the only times I see pool bonding in reference to a "deck" is when the word "deck" is used to describe a concrete surround.. Has anyone installed a deck (wood or composite) around their pool and had to bond it? I have tried searching online and everything with pool bonding refers to "decks" that are pavers, concrete, etc.. I have yet to find anything about bonding a wood or composite deck.. The deck we are building has a traditional wood undercarriage and then composite planks/trim and pvc railing.. Thank for any input...