So heres my battle...
current TA is 160ish...
Fill water TA is 180
Ive been playing he MA game trying to get my TA down. Wait for PH to get up to about 7.5, hit it 32oz MA to take it down to 7.1 while dropping TA about 10 every time I do it. Ive managed to drop it about 20 ppm in the last few weeks but by the time I get my ph back up enuf to drop it again, the water level drops and I have to add more fill water, almost negating my work with the MA additions. I had a small tear in the liner that was probably contributing to the water level but that is fixed so hopefully the water loss will be minimal now. Im also trying to raise the temp of the pool (only 6hours direct sunlight a day) so the cover stays on most of the time no allowing the PH to rise faster.
I don't want to add too much MA to drop it below 7 but it seems like its 1 step forward, 2 steps back.. IS there any other way to drop TA faster without dropping PH to low? IS a higher TA really that big of an issue?
current TA is 160ish...
Fill water TA is 180
Ive been playing he MA game trying to get my TA down. Wait for PH to get up to about 7.5, hit it 32oz MA to take it down to 7.1 while dropping TA about 10 every time I do it. Ive managed to drop it about 20 ppm in the last few weeks but by the time I get my ph back up enuf to drop it again, the water level drops and I have to add more fill water, almost negating my work with the MA additions. I had a small tear in the liner that was probably contributing to the water level but that is fixed so hopefully the water loss will be minimal now. Im also trying to raise the temp of the pool (only 6hours direct sunlight a day) so the cover stays on most of the time no allowing the PH to rise faster.
I don't want to add too much MA to drop it below 7 but it seems like its 1 step forward, 2 steps back.. IS there any other way to drop TA faster without dropping PH to low? IS a higher TA really that big of an issue?