I'm having a 24' round AGP (see details in signature) installed in a couple of days. The pump I bought (as recommended by the pool store guy) is a 1.5 hp Blue Torrent Bond Master. The pump and filter will be installed near the house, which will be at an elevation about 1' above the water level and approx. 25' away from the installed pool. After browsing this forum, I believe I may need a "self priming" pump- I called the pool store and was told the pump I bought would be fine....the installer, during his initial visit, said I may want to think about a 2 hp pump to make up for the distance/elevation change....
Neither the pool store guy or the installer convinced me they had the right answer...I trust the folks on this forum as I have learned so much in such a short time -- you guys are the best! Please help with your knowledge and recommendations!
Neither the pool store guy or the installer convinced me they had the right answer...I trust the folks on this forum as I have learned so much in such a short time -- you guys are the best! Please help with your knowledge and recommendations!