SWG No Power (Aquarite)

[kenmacboston]

I have no power at all to my unit. Replaced the current limiter 2 months ago, and the unit worked until last week. Checked for burned out components but do not see anything that looks burned. Is there a procedure to check voltage at various locations to confirm which board is bad?

 

[JamesW]

Check for power where the power wires connect to the box.

Can you post the diagnostics?

 

[kenmacboston]

I've checked for power at the connections to the main board and I have power at the source (where the wires are connected onto the main board). Nothing beyond that on the board. I have also looked for breaks on the board itself (solder or plating on the board) and I do not see any irregularities. I have not checked the transformer yet (I need to confirm the voltage going out to the inline unit (what is the voltage going to the generator itself?) Thank you.

 

[ping]

InyoPools has a troubleshooting guide, https://images.inyopools.com/cloud/documents/aquarite-troubleshooting-guide.pdf.

 

[kenmacboston]

This is exactly what I am looking for, will check voltage, etc, before buying what I need. Thank you!