Concern about a little accident with reagent R-0013

[trevorfl]

Hello everyone and Happy Fourth of July!

I, by mistake, added to the pool water about 1 or 2 oz, maybe 3? of reagent R-0013.

Do I need to worry about it or it is not a big issue since the amount was just a little?

Is it safe to use the pool?

My pool is 15k gallons.

Thank you in advance!

 

[Piolin]

No concern to me, but don't do it again... ?

Starting day 5/25/2015 INTEX AGP 24'x12'x54" 8,400 gal, with salt and borax, INTEX 3,000 GPH pump with 16"sand filter, WM Hayward Skimmer, Intex SWG CG-28669, 1 1/2" hard plumbed PVC, Lil' Shark Vacuum With Leaf Canister, TF100 test kit, speed stir, K-1766 Taylor salt test

 

[proavia]

3oz in 15,000 gallons should have little effect. Here the MSDS: http://www.taylortechnologies.com/MSDSS/0013.PDF
While the MSDS does say it can cause irritation, remember that's undiluted. In a 15k gallon pool you have effectively diluted 3oz of R-0013 80,000 (80k) times.

How are your test results? How's the water look? If your test results are within TFP recommended guidelines, it's safe to swim.

 

[JamesW]

A few ounces should not pose any risk.

 

[trevorfl]

3oz in 15,000 gallons should have little effect. Here the MSDS: http://www.taylortechnologies.com/MSDSS/0013.PDF
While the MSDS does say it can cause irritation, remember that's undiluted. In a 15k gallon pool you have effectively diluted 3oz of R-0013 80,000 (80k) times.

How are your test results? How's the water look? If your test results are within TFP recommended guidelines, it's safe to swim.

Test results are all good. The water is clear. Thank you your reply.


Sent from my iPhone using Tapatalk

 

[trevorfl]

A few ounces should not pose any risk.

Thanks!