I have been fighting my pool all yr. Received my TF-100 on 6-13-16. Pool had been green & brown. I had been able to get it to milky white but never able to see bottom of the pool. I followed SLAM, kept FC up, brushed several times daily, vacuumed. It never seemed to get past the milky stage. I finally decided to FLOC the pool 7-2-16, followed directions on bottle & circulated for 2 hours & let sit turned off overnight. Vacuumed to waste the yesterday morning & had to do it in 2 parts because water level got to low. The filling process is painfully slow due to low water pressure. About 10 PM I added 83 OZ 10% bleach as pool math said that should take it to 16 FC. Tested this morning about 9:30 (due to rain). I am letting the FC drift down & will test pH & will test CYA again on a sunny day. Weather permitting am I good to let everyone in Finally?
FC - 15
CC - either 0 or .5
pH - didn't test due to FC being above 10
TA - 100
CH - 100
CYA - didn't test today because overcast & drizzly but added to bring back up to 30 on 7/2/16
Borates - I use Mule 20 for pH but not sure how to test for Borates
FC - 15
CC - either 0 or .5
pH - didn't test due to FC being above 10
TA - 100
CH - 100
CYA - didn't test today because overcast & drizzly but added to bring back up to 30 on 7/2/16
Borates - I use Mule 20 for pH but not sure how to test for Borates