Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 14 of 14

Thread: Intex Towel Rack with Cup Holder for Above Ground Pools

  1. Back To Top    #1
    Piolin's Avatar
    Join Date
    Sep 2010
    Location
    Miami, FL
    Posts
    604

    Intex Towel Rack with Cup Holder for Above Ground Pools

    I know we can make one from PVC, but for the price it is not bad, any opinions?



    https://www.amazon.com/dp/B015DXOHLQ...I2ISSIROLJZ8OE
    8,400 gal Intex, 3K GPH pump, 16" sand filter, SWG CG-28669, TF100 test kit, speed stir, K-1766 Taylor salt test.

    The corner stone of TFP
    Pool School - Chlorine / CYA Chart

  2. Back To Top    #2

    Join Date
    May 2015
    Location
    Fort Mill, SC
    Posts
    179

    Re: Intex Towel Rack with Cup Holder for Above Ground Pools

    If you are trying to figure out how to install a cup holder on an above ground pool, you might be a redneck!
    20K gallon vinyl inground pool, Hayward Pro Series sand filter, 1 HP pump, Taylor K-2006

  3. Back To Top    #3
    Piolin's Avatar
    Join Date
    Sep 2010
    Location
    Miami, FL
    Posts
    604

    Re: Intex Towel Rack with Cup Holder for Above Ground Pools

    oh yeah, and a beer holder too!!!!
    8,400 gal Intex, 3K GPH pump, 16" sand filter, SWG CG-28669, TF100 test kit, speed stir, K-1766 Taylor salt test.

    The corner stone of TFP
    Pool School - Chlorine / CYA Chart

  4. Back To Top    #4

    RonsPlc's Avatar
    Join Date
    May 2015
    Location
    Gaylesville, AL
    Posts
    360

    Re: Intex Towel Rack with Cup Holder for Above Ground Pools

    any way to set my beer on ICE without cooling off the pool? :/
    14600 gal Intex 24' Round 52" deep AG Pool (Heavily Modified)
    200lb sand filter w/2 speed 1.5/0.5hp pump
    Stenner 45MHP10 Liquid Chlorine (well... bleach) Injector. Borates added.
    K-2006 test kit w/Speedstir
    Pool School - PoolMath - HIGHLY Recommended Test Kits

  5. Back To Top    #5

    Join Date
    Feb 2009
    Location
    Paradise (Hampstead, NC)
    Posts
    333

    Re: Intex Towel Rack with Cup Holder for Above Ground Pools

    You might want to cool it off in a few weeks...
    16X32 AB, Pentair SD filter, 3/4hp Pentair Optiflo, CircuPool RJ30+ swg, TF 100

  6. Back To Top    #6
    Piolin's Avatar
    Join Date
    Sep 2010
    Location
    Miami, FL
    Posts
    604

    Re: Intex Towel Rack with Cup Holder for Above Ground Pools

    Quote Originally Posted by RonsPlc View Post
    any way to set my beer on ICE without cooling off the pool? :/
    Amazon.com: Mega Chill Inflatable Floating Cooler: Toys Games

    Starting day 5/25/2015 INTEX AGP 24'x12'x54" 8,400 gal, with salt and borax, INTEX 3,000 GPH pump with 16"sand filter, WM Hayward Skimmer, Intex SWG CG-28669, 1 1/2" hard plumbed PVC, Lil' Shark Vacuum With Leaf Canister, TF100 test kit, speed stir, K-1766 Taylor salt test
    8,400 gal Intex, 3K GPH pump, 16" sand filter, SWG CG-28669, TF100 test kit, speed stir, K-1766 Taylor salt test.

    The corner stone of TFP
    Pool School - Chlorine / CYA Chart

  7. Back To Top    #7

    RonsPlc's Avatar
    Join Date
    May 2015
    Location
    Gaylesville, AL
    Posts
    360

    Re: Intex Towel Rack with Cup Holder for Above Ground Pools

    I KNEW there was a way! lol
    14600 gal Intex 24' Round 52" deep AG Pool (Heavily Modified)
    200lb sand filter w/2 speed 1.5/0.5hp pump
    Stenner 45MHP10 Liquid Chlorine (well... bleach) Injector. Borates added.
    K-2006 test kit w/Speedstir
    Pool School - PoolMath - HIGHLY Recommended Test Kits

  8. Back To Top    #8
    Jamison04's Avatar
    Join Date
    Jun 2011
    Location
    Tecumseh, OK
    Posts
    553

    Re: Intex Towel Rack with Cup Holder for Above Ground Pools

    I have that mega chill and it is good for holding drinks (cup holders) but it does not hold ice for long. The bottom is a single layer of vinyl and the warm pool water quickly melts the ice. It almost needs an inflatable bottom in the cooler to buffer the temp difference.

    24'x52" Artesian w/ Portifino liner - Hayward 1hp powerflo matrix w/24" sand filter - AquaTrol RJ SWG. Solar heating to come. -

  9. Back To Top    #9
    Piolin's Avatar
    Join Date
    Sep 2010
    Location
    Miami, FL
    Posts
    604

    Re: Intex Towel Rack with Cup Holder for Above Ground Pools

    Good to know, thank you... 😊

    Starting day 5/25/2015 INTEX AGP 24'x12'x54" 8,400 gal, with salt and borax, INTEX 3,000 GPH pump with 16"sand filter, WM Hayward Skimmer, Intex SWG CG-28669, 1 1/2" hard plumbed PVC, Lil' Shark Vacuum With Leaf Canister, TF100 test kit, speed stir, K-1766 Taylor salt test
    8,400 gal Intex, 3K GPH pump, 16" sand filter, SWG CG-28669, TF100 test kit, speed stir, K-1766 Taylor salt test.

    The corner stone of TFP
    Pool School - Chlorine / CYA Chart

  10. Back To Top    #10

    Join Date
    Sep 2015
    Location
    Rancho Cucamonga, CA
    Posts
    46

    Re: Intex Towel Rack with Cup Holder for Above Ground Pools

    Quote Originally Posted by Piolin View Post
    I know we can make one from PVC, but for the price it is not bad, any opinions?



    https://www.amazon.com/dp/B015DXOHLQ...I2ISSIROLJZ8OE
    Hey that's not bad looking. Price too. Maybe a good place for a phone and Bluetooth speaker too. I wonder how sturdy it is.
    AG Round Intex Ultra Frame 16'x48", 5050 gallons
    Intex 28681EG / CS20110 Combo Sand Filter Pump & Salt Water System
    Intex Auto Pool Cleaner, Intex Wall Mount Skimmer, Intex LED Pool Sprayer
    TF-100, K-1766, Speedstir

  11. Back To Top    #11

  12. Back To Top    #12

    Join Date
    Sep 2015
    Location
    Rancho Cucamonga, CA
    Posts
    46

    Re: Intex Towel Rack with Cup Holder for Above Ground Pools

    The base is really heavy with water in it. Seems sturdy enough. The top cup/accessory holder is a good size. Thanks for the OP.



    AG Round Intex Ultra Frame 16'x48", 5050 gallons
    Intex 28681EG / CS20110 Combo Sand Filter Pump & Salt Water System
    Intex Auto Pool Cleaner, Intex Wall Mount Skimmer, Intex LED Pool Sprayer
    TF-100, K-1766, Speedstir

  13. Back To Top    #13
    Piolin's Avatar
    Join Date
    Sep 2010
    Location
    Miami, FL
    Posts
    604

    Re: Intex Towel Rack with Cup Holder for Above Ground Pools

    Glad you like it...
    8,400 gal Intex, 3K GPH pump, 16" sand filter, SWG CG-28669, TF100 test kit, speed stir, K-1766 Taylor salt test.

    The corner stone of TFP
    Pool School - Chlorine / CYA Chart

  14. Back To Top    #14
    Cap'n Hook's Avatar
    Join Date
    Aug 2015
    Location
    South Central Texas
    Posts
    29

    Re: Intex Towel Rack with Cup Holder for Above Ground Pools

    My wife picked up some styrofoam container with a removable styro lid, I think something cold came shipped to her. It's approximately 12"x12"x8" tall, holds eight canned beverages with ice, and since it's styrofoam, will keep ice all day long. The beauty is, the thing floats in the pool next to you, so you never have to get out. And it's bottom heavy enough not to tip over while using as a large drink coaster.
    The Pool Factory Melenia 30'x54" Round semi-inground pool 25ga overlap liner
    Hayward SP15922S Power Flo Matrix 1hp 2-speed pump
    Hayward DE3620 Progrid 36 square-foot vertical grid DE filter
    Hayward SP0710XR50 Pro-series Vari-flow backwash valve
    ~22,000 gallons

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •