Having trouble keeping up my FC after a replaster in April.
18K
intellichem
Muriatic and Intellichlor swcg
Fc 5.8
cc .4
cya 35
salt 4050
cH 350
ph 7.3
TA 110
borates minimal
test kit taylor 2006 fresh reagents.
FOCL .6 loss and cc.4
Water clear
Orp probe is new and responding to additions of chlorox.
All lights are green on intellichem including flow and salt level.Swcg plates are clean. only 40% of 10k hour runtime used up. Diagnostics mode shows no issue.
When intellichem is on I took a sample from the jets and a sample from the pool and FC was the same. I also do not see bubbles coming out of the jets that i usually see when the swcg is working.
Has anyone seen a SWCG fail with all light indicating that it is working correctly? Any other suggestions?
Thanks.
18K
intellichem
Muriatic and Intellichlor swcg
Fc 5.8
cc .4
cya 35
salt 4050
cH 350
ph 7.3
TA 110
borates minimal
test kit taylor 2006 fresh reagents.
FOCL .6 loss and cc.4
Water clear
Orp probe is new and responding to additions of chlorox.
All lights are green on intellichem including flow and salt level.Swcg plates are clean. only 40% of 10k hour runtime used up. Diagnostics mode shows no issue.
When intellichem is on I took a sample from the jets and a sample from the pool and FC was the same. I also do not see bubbles coming out of the jets that i usually see when the swcg is working.
Has anyone seen a SWCG fail with all light indicating that it is working correctly? Any other suggestions?
Thanks.