I was SLAMing out green water so keeping high chlorine levels. CYA was below 10 so I added stabilizer through the skimmer two nights ago. Tested next morning and found
FC 23
CC 0
pH 7.2
TA 120
CH 150
CYA 30
water was crystal clear until big swim party today and water turned a bit cloudy so tested again (48 hours after adding stabilizer to skimmer)
FC 12
CC 0
Ph 7.2
TA 120
CH 150
CYA 20
What accounts for the loss of CYA? Is it just that I tested too early the first time? Or the little bit of hose water I added to replace splash-out (ran hose 10 minutes)? Just want to make sure that I do it right when I add more CYA this time.
Thanks
FC 23
CC 0
pH 7.2
TA 120
CH 150
CYA 30
water was crystal clear until big swim party today and water turned a bit cloudy so tested again (48 hours after adding stabilizer to skimmer)
FC 12
CC 0
Ph 7.2
TA 120
CH 150
CYA 20
What accounts for the loss of CYA? Is it just that I tested too early the first time? Or the little bit of hose water I added to replace splash-out (ran hose 10 minutes)? Just want to make sure that I do it right when I add more CYA this time.
Thanks