Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Conferplastics 7100X? Ladder help, won't stay down!

  1. Back To Top    #1
    Cain's Avatar
    Join Date
    Aug 2015
    Location
    West Fargo, ND
    Posts
    95

    Conferplastics 7100X? Ladder help, won't stay down!

    I have an Above Ground Pool, Splashpools Omega 20ft 9000 gallon pool.

    The ladder it came with for some reason I can't keep it down in the water. Its this model I think:


    Pool Ladders A-Frame

    7100X series



    To confirm, am I supposed to fill all of the holes with water, both the pool side and the dry side?

    Sorry for the dumb question, still learning ...
    - Splash Omega 20 Above Ground 20 ft round 4ft deep 9000 gallon pool
    - Splashpak Cartridge Filter, EF75 1HP 75 GPM pump
    - TFT-100 XL Test Kit

  2. Back To Top    #2

    RonsPlc's Avatar
    Join Date
    May 2015
    Location
    Gaylesville, AL
    Posts
    360

    Re: Conferplastics 7100X? Ladder help, won't stay down!

    from their site...

    Model #7100X

    Evolution A-frame Ladder


    • Economical, yet full-featured
    • Fits 48” to 54” pools
    • Snap-lock treads for quick, easy assembly
    • Swing-up outer section inhibits unauthorized access to pool
    • Outer treads can be padlocked (lock included)
    • 16” tread width
    • No sand or bricks required; just fill with water
    • Available in warm grey, complementing today’s brown or grey pools
    • Convertible to Inpool ladder with otional CK-7100W conversion kit
    • Features an anti-entrapment barrier
    • Weight guideline: 300 lbs.




    I made the part you are looking for Bold, Red letters.

    Fill them ALL with water ... the added weight on the outside (Air side) is what will keep it in place.
    Filling it on the water side only replaces the air gap and will make it a wash for weight.
    14600 gal Intex 24' Round 52" deep AG Pool (Heavily Modified)
    200lb sand filter w/2 speed 1.5/0.5hp pump
    Stenner 45MHP10 Liquid Chlorine (well... bleach) Injector. Borates added.
    K-2006 test kit w/Speedstir
    Pool School - PoolMath - HIGHLY Recommended Test Kits

  3. Back To Top    #3
    Cain's Avatar
    Join Date
    Aug 2015
    Location
    West Fargo, ND
    Posts
    95

    Re: Conferplastics 7100X? Ladder help, won't stay down!

    Thanks!
    - Splash Omega 20 Above Ground 20 ft round 4ft deep 9000 gallon pool
    - Splashpak Cartridge Filter, EF75 1HP 75 GPM pump
    - TFT-100 XL Test Kit

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •