Now that we are done with the Slam, we still have a few numbers out of whack and I'm not sure what to do.
FC is good at 6. Turned SWCG on last night so hopefully it's good to go.
PH was 7.2 from the tap, now it's 7.7 or 7. 8. We added nothing to raise it.
Cya is 60.
CH= 200
TA= 190
The ph and TA confuse me. I see TA is related to PH, but how do I drop the TA drastically without drastically dropping the PH? We had been aerating during Slam and iron removal, buy there was no change.
We have Clorox PH down, which seems to be sodium hydrogensulphate aka sodium bisulphate 90 - 95%. I see some websites that say this is dry acid.
Do I deal with TA, then bring PH back up? Can I work on CH at the same time, or should I wait?
Sent from my XT1254 using Tapatalk
FC is good at 6. Turned SWCG on last night so hopefully it's good to go.
PH was 7.2 from the tap, now it's 7.7 or 7. 8. We added nothing to raise it.
Cya is 60.
CH= 200
TA= 190
The ph and TA confuse me. I see TA is related to PH, but how do I drop the TA drastically without drastically dropping the PH? We had been aerating during Slam and iron removal, buy there was no change.
We have Clorox PH down, which seems to be sodium hydrogensulphate aka sodium bisulphate 90 - 95%. I see some websites that say this is dry acid.
Do I deal with TA, then bring PH back up? Can I work on CH at the same time, or should I wait?
Sent from my XT1254 using Tapatalk