Balancing PH
- Thread starter broben
- Start date
- Jun 22, 2014
- 47,797
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Hello and welcome to TFP! 
Always get some chlorine in the water right away based on your CYA level to avoid algae, then balance pH. They can be done within a short time of each other anyways, but best to avoid algae for sure.
Always get some chlorine in the water right away based on your CYA level to avoid algae, then balance pH. They can be done within a short time of each other anyways, but best to avoid algae for sure.I have been having trouble getting my CYA levels down? I have partial drained and refilled but my CYA has stayed between 100-150. What can I do?
- Mar 24, 2014
- 2,455
- Pool Size
- 32000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool SJ-55
How are you chlorinating?
Water replacement will lower CYA. You may have to do several rounds.
Water replacement will lower CYA. You may have to do several rounds.
- Jun 22, 2014
- 47,797
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
In addition to what Mr Bruce pointed-out, now looks like it would also be a good time for you to confirm for us how you area testing your water. Also, please add your pool info to your signature by going to the top of the TFP web page (just under the Pool School button) and select "SETTINGS". On the next page look to the left for a menu bar that says, “MY SETTINGS” and go to "EDIT SIGNATURE" to enter your pool and equipment info there. Or you can click EDIT YOUR SIGNATURE. It will help us later. This link may also help you: Pool School - Read This BEFORE You Post.
I was using dichlor shock and trichlor pucks until about 3 weeks ago when my cya began to raise. Since then I have been using 10% liquid chlorine.
Similar threads
