Increasing ph

[Praguseo]

how do I increase PH without alkalinity? Is my calcium hardness ok?
Taylor 2006kit #
FC 6
CC.25
Ph 7.0
Alk 150
CH 210
Cya40
When I did my base deman test it took 4 drops and Taylor kit says add soda ash 3.lb for 20thousand gallon ..
I have 35g vinyl ingrown pool with sand filter..

 

[pooldv]

Welcome to TFP!

Here is everything you ever wanted to know about chemicals and how to add them to your pool all on one page, Pool School - Recommended Pool Chemicals

I would either aerate a bit to raise PH or just wait a few days to see if it rises on its own from the high TA.

Yes, your CH is fine for a vinyl pool.

Here is some info on how to put your pool info into your signature so you can stop typing it, Pool School - Read This Before You Post

 

[duraleigh]

If you want to raise it right now you could use 20 mule team borax and it will have a very minor affect on your TA.

If it was my pool, I would take pooldv's advice and leave it alone. You can also aerate and your pH will come up and TA will go down.