We just bought an Hayward Aqua Rite T15 salt chlorinator. We made sure we followed every instruction in the book before installing. We dumped the salt in the pool Saturday night and turned everything on. Sunday morning the no flow light was on. We do not have a flow issues, have checked the flow switch for continuity ( it was good), emptied baskets, and checked all the wires. Everything checks out. I have read through different forums and watched you tube videos. What am I missing. Our pool is in the direct sun and we are afraid to lose the balance if we mess with this much longer. We have a lot of money tied up in this and we were hoping this would make managing our pool a little easier. So far we are frustrated and I have a headache. Any suggestions?