Ph is around 7.5 and water temp is 85 deg. The controller is reading low salt and is at a reduced rate basically producing no chlorine. When I reset the unit the instant salinity reads 3500 then slowly goes to 0000. I cleaned the salt cell before starting the season. Seamed to be working now the last couple days it always switches to reduced output.
I did test with the test strips as this is the only way I can test and it shows salinity is where I need it to run. It ran perfectly last season up until I closed it. Only one season on the unit.
Called circupool but they had already closed for the day. Just wondering if anyone had any ideas.
I did test with the test strips as this is the only way I can test and it shows salinity is where I need it to run. It ran perfectly last season up until I closed it. Only one season on the unit.
Called circupool but they had already closed for the day. Just wondering if anyone had any ideas.