I have a 20,000 gal pool and the old single speed 7 year old motor just died. The system uses 1.5 in pipes with 2 skimmers and one main drain. Here are my concerns.
1. The Tagelus sand filter is rated at 40 GPM when my pool should have at least a 42 GPM flow capacity.
2. The filter valve is old style and leaky. I replaced gaskets and valve last year but still not a solid valve and requires me to resettle the position of the valve to stop leaks.
3. The motor is dead, single speed and was an electrical HOG.
4. The pump assembly is a flip top and works ok. Have trouble with the flip top gasket from time to time.
I am considering replacing individual components, but maybe replacing it all makes since.
Pictures added.
Advice please?
1. The Tagelus sand filter is rated at 40 GPM when my pool should have at least a 42 GPM flow capacity.
2. The filter valve is old style and leaky. I replaced gaskets and valve last year but still not a solid valve and requires me to resettle the position of the valve to stop leaks.
3. The motor is dead, single speed and was an electrical HOG.
4. The pump assembly is a flip top and works ok. Have trouble with the flip top gasket from time to time.
I am considering replacing individual components, but maybe replacing it all makes since.
Pictures added.
Advice please?