I have an intellitouch system. After a power outage (lightning storm) my wired control panel inside the house stopped turning on the pool pump. Everything else still works fine. I can operate the pump from the access panel on top of the pump in service mode. (In auto mode, the pump access panel looks like its working because it gives the appropriate "screen not active" message.) In service mode, when I hit the button that would normally activate the pool pump (the little square buttons at the top of the access panel), the light comes on but the pump does not work. Same result when I try to turn the pump on from inside access panel. All of the other pumps, lights, etc. work normally. I have a feeling it's a simple fix that somebody not so ignorant could remedy in a minute or two. Seems like a setting on the access panel on top of the pump but, for the life of me, I can't figure out how to make it work. Anybody have any suggestions? TIA