I am in the process of Slamming my Pool, But once I get to the point that the FC is good. and is drifting down to normal levels. At what point can I turn my SWG back on to maintain?
As soon as you pass the SLAM and begin to let the FC drift back down to your target, start adjusting your SWG % rate to maintain that desired FC target listed on the Chlorine/CYA Chart (link below).
ok, so my FC slam target was 28. As I drift down toward 5 FC. I want my SWG on as soon as possible? correct. or do I wait til its close to my normal target 5ppm?
You can let it drop and get closer. Your FC may take a day or two to finally get back down to around 10 or so. Once you know the FC is around 7-8, that's probably a good time to let it start working again. If you elect to start it sooner, it won't hurt anything, just be some excess FC really.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!