Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Jandy AquaLink RS - adjsut chlorine production

  1. Back To Top    #1

    Join Date
    Jun 2016
    Hernando, MS

    Jandy AquaLink RS - adjsut chlorine production

    When I adjust chlorine production from the handheld PDA it has no effect on chlorine production at user interface board. If I adjust at the user interface board (has to be done while in service mode) production reverts back to 0% when I switch back to auto mode. Can anyone help?

  2. Back To Top    #2
    Mod Squad jblizzle's Avatar
    Join Date
    May 2010
    Tucson, AZ

    Re: Jandy AquaLink RS - adjsut chlorine production

    Welcome to TFP!!!

    Sorry about the slow response. Your question is about a very specific automation system that few members likely have experience with. Maybe someone will see this.
    Jason, TFP Moderator
    18k IG pebblesheen pool, Hayward ProLogic P4 w/ T-15 SWG, Pentair 1HP 2-speed Superflo, Hayward 6020 DE filter
    500 sqft Heliocol solar panels, ThePoolCleaner, TF-100 test kit w/ SpeedStir
    Pool School + Test Kit + PoolMath = A TROUBLE FREE POOL
    If you found TFP helpful and we saved you money ... Become a TFP Supporter!

  3. Back To Top    #3

    Re: Jandy AquaLink RS - adjsut chlorine production

    Has it ever worked?

    The aquapure circuit board has to have a four wire rs485 connection to the aqualink rs board.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts