FC = 7, CC = >0.5, pH = 7.4, TA = 110, CYA = 60 using Taylor K2006 Test Kit. I adjusted the pH before beginning other treatment then raised the FC to 7 then checked CC and the other posted results. The water is less cloudy than when I opened the pool but doesn't seem to be improving much. Sand filter is operating as expected and pressure looks good. I have brushed the pool several times. I didn't SLAM to 24 since the CC was less than .5 at FC = 7. Am I missing something? Do I need to redo the SLAM process and take it to 24? It seems I remember a post about a value of dropping FC overnight being an indicator. It looks to be holding at 7 over the last 24 hours. New at this process as I'm used to spending $$$ on weekly shock, $$$$ chlorine tabs and even more $$$$$ on algaecide and other chemicals. Appreciate the feedback.