After a liner replacement, water refill and filter sand replacement I also replaced the T Cell 15 for a fresh start with everything.
When I plug in the Mineral Springs MS-11 control Box the power light comes on, the flow light blinks for 20 seconds then goes out, the generating light comes on then 15 seconds later all indicator lights go out.
The new T Cell is a generic from PoolSupplyWorld, they indicate that it's compatible.
Side Note: the display panel remains on, however the mineral reading is very low compared to the reading from my pool store.
Any suggestions as to what could be going wrong?
When I plug in the Mineral Springs MS-11 control Box the power light comes on, the flow light blinks for 20 seconds then goes out, the generating light comes on then 15 seconds later all indicator lights go out.
The new T Cell is a generic from PoolSupplyWorld, they indicate that it's compatible.
Side Note: the display panel remains on, however the mineral reading is very low compared to the reading from my pool store.
Any suggestions as to what could be going wrong?