I had Wet Edge Prism Matrix (Deep Sea Blue color) installed in our new 40' x 20' pool last year. I went with this expensive product because I was told that it wouldn't fade like many other more "standard" plaster products in darker hues. It is nice overall but I'm rather disappointed because the color is inconsistent throughout the pool. There's considerable white streaking and blotchiness all over the bottom of the pool detracting from the gorgeous dark blue color. My pool company tells me that this is normal but when I look at videos online of the same color installed in pools I don't see any color inconsistencies. This problem was noticeable only in one area upon completion last August but has gotten considerably worse since then.
They tell me that this is the white plaster pool surface bleeding through the Wet Edge product and that in order to resolve I would have to empty the pool and use acid to remove the excess plaster. Funny thing is that this is not occurring at all on the sides of the pool, only the bottom. I need to contact the company directly to get some advice on alternatives (other than emptying the pool) on how to resolve. Anybody experience similar issues? If so, what can be done to resolve? Thanks!
They tell me that this is the white plaster pool surface bleeding through the Wet Edge product and that in order to resolve I would have to empty the pool and use acid to remove the excess plaster. Funny thing is that this is not occurring at all on the sides of the pool, only the bottom. I need to contact the company directly to get some advice on alternatives (other than emptying the pool) on how to resolve. Anybody experience similar issues? If so, what can be done to resolve? Thanks!