I started a thread the other day about the test kit, but now it's more of a straight on SLAM process so thought I would move it over here.
Question about FC reading in Taylor K-2006 test
Pool: 45,000 gal vinyl liner
CYA - 50 (from prior test)
TA - 120
PH - 7.6
CH - 200
Two nights ago, I did a target dump (11 gallons of 8.25%) for a FC of 20, did it again in the morning.
By the evening I had
FC-1
CC-8
I added another 11 gallons of 8.25%, waited 1 1/2 hours and now have this:
FC - 0
CC - 11
I just went through $100 of bleach in 24 hours and am sitting on 0 FC with a steadily rising CC.
Any ideas?
Question about FC reading in Taylor K-2006 test
Pool: 45,000 gal vinyl liner
CYA - 50 (from prior test)
TA - 120
PH - 7.6
CH - 200
Two nights ago, I did a target dump (11 gallons of 8.25%) for a FC of 20, did it again in the morning.
By the evening I had
FC-1
CC-8
I added another 11 gallons of 8.25%, waited 1 1/2 hours and now have this:
FC - 0
CC - 11
I just went through $100 of bleach in 24 hours and am sitting on 0 FC with a steadily rising CC.
Any ideas?