Replace return outlet in Pro Series

[chayne]

I would like to replace the return outlet on my Pro Series Pool. I was curious if I could just by an Intex eyeball and make the replacement. I know that my return pipe is 1.5". The return outlet i am looking at says that it is also 1.5". so does it mean i can just take the one in my pool now out and add this one in its place?

Charles

 

[cowboycasey]

Welcome to TFP

most intex stuff they use different fitting so I am not sure if it will work, you could always return it if it does not work

 

[Blake1989]

Like cowboy said, you may have to purchase an adapter of some sort or retrofit it. Nothing too overly difficult.

 

[chayne]

ok i think i am going to go for it. but first things first. i am going to upgrade the pump/filter that came with my pool. i am going to go with the Intex 2500.

 

[Blake1989]

Consider the Intex sand filter combo. Sand filters are easier to maintain but do not filter as fine particles as the average cartridge filter although they will do their job wonderfully. They have a lower HP model for your size pool.

 

[chayne]

ok thanks for the input. will have to check that one out.

- - - Updated - - -

is this like what you are talking about?

Amazon.com : Intex Krystal Clear Sand Filter Pump for Above Ground Pools, 3000 GPH Pump Flow Rate, 110-120V with GFCI : Swimming Pool Sand Filters : Patio, Lawn Garden

 

[Blake1989]

There is a lower HP one as well. That one is good also. For your pool, the lower HP one would suffice.

 

[chayne]

this one?

Amazon.com : 1200 GPH Sand Filter System With GFCI 110-120 Volt Plug : Swimming Pool Water Pumps : Patio, Lawn Garden

 

[Blake1989]

That's the one!