Hello! I am new to this site and just looking around it is awesome! I had pool water tested today at local pool store and the readings were as follows:
Free Chlorine 0.3
Total Chlorine 4.18
Combined Chlorine 3.88
CYA 89
PH 7.4
Hardness 308
Alkalinity 113
Adjusted Alkalinity 83
Copper 0
Iron 0
Phosphate 494
I have an above ground 15x30 oval pool, 4 feet deep.
I was reading about CYA and realized it's high. I have chlorine tabs and a frogger system but I do not want the CYA to go up any higher...not sure what to do???
Also I'm not sure what the difference is between alkalinity and adjusted alkalinity. The readout I was given says adjusted alkalinity is low but alkalinity is fine. Please help!
Free Chlorine 0.3
Total Chlorine 4.18
Combined Chlorine 3.88
CYA 89
PH 7.4
Hardness 308
Alkalinity 113
Adjusted Alkalinity 83
Copper 0
Iron 0
Phosphate 494
I have an above ground 15x30 oval pool, 4 feet deep.
I was reading about CYA and realized it's high. I have chlorine tabs and a frogger system but I do not want the CYA to go up any higher...not sure what to do???
Also I'm not sure what the difference is between alkalinity and adjusted alkalinity. The readout I was given says adjusted alkalinity is low but alkalinity is fine. Please help!