Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Hayward Perflex shoots white cloudy water on startup after bumping

  1. Back To Top    #1

    Join Date
    May 2016
    Location
    oshawa
    Posts
    1

    Hayward Perflex shoots white cloudy water on startup after bumping

    Hey, i'm not sure what is going on, but if i bump my filter then turn it back on, i get and initial spray of cloudy water. Any suggestions what could be the issue? Only happens when i bump,or at least it's the only time i've noticed. Lasts about 3-5 seconds then is crystal clear.

    Thanks in advance

  2. Back To Top    #2

    Re: Hayward Perflex shoots white cloudy water on startup after bumping

    Possibly cracked tube sheets or damaged fingers. Probably need to disassemble, clean and check for damage.
    Support the site

    Trouble Free Pool is a free resource. The people who answer questions are volunteers. If you find the site to be a good resource, please consider making a donation to help support the site. Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •