When I put up my Intex Sand Filter I noticed that the PSI was around 10 (in the green zone). I'm sure being new in using this I've gone over board with backwashing and etc.. Today I noticed that my PSI is now down to 6 PSI. In addition to this, where the outlet hose goes into a basket before it goes into the pump, (the place where you can let air out), before I start it, I always let all the air out before starting. It seems like within 5 mins the water level goes down (about 1/2 way) as if air is getting back in. All hose connections are tight, no leaks. Would it be my skimmer that is causing the air or what?
Thanks For the Help
Thanks For the Help