Syncing Pentair 5g LEDs without automation

[IrwinK]

Electrician wired my two 12v 5g LEDs together using one transformer.

I do not have the Pentair automation but do have the Intermatic Multiwave with remote contoller. The LEDs are controlled by 1 circuit as a switch.

Pool is still under construction so can't test yet.

Will the 2 LEDS start off syncronized? If they get out of sync will they reset when power is switched off and back on?

Thanks.

 

[gary300]

Here is a link to the 5G manual - Pentair Intellibrite 5G

 

[IrwinK]

Thanks. The manual above has some more information that will help me but is dated 08/21/09.

The manual that I got with the LEDs is dated 04/2015

The 2009 manual did not call them 5G.

 

[gary300]

Sorry about that, copied the wrong link. Here is the 5G version

The lights will re-sync is you turn them off for a short time then turn them back on. Using a switch to control the lights is a real pain. If you do not have automation then you should consider the Intellibrite 5G controller