Hi folks.
I cranked-up the run-time on my pump, in order to get more hours of solar heat generation this week. My plan was to raise the temperature for a birthday party this weekend. (Tomorrow)
When I increased the run time from 4 hrs to 8 hrs, I didn't think to reduce the % of generation on my SWG.
Well, I now have 80 degree water, with a FC level of 12!
It doesn't smell like chlorine, but is that going to be a skin irritant if I allow it to be used?
Today's #s
FC= 12
CC=0
PH=8.0 ( I added acid to target 7.4)
TA= 70
CH=350
CYA=45
Temp=80
What do you think??
Thanks in advance
MIKE
I cranked-up the run-time on my pump, in order to get more hours of solar heat generation this week. My plan was to raise the temperature for a birthday party this weekend. (Tomorrow)
When I increased the run time from 4 hrs to 8 hrs, I didn't think to reduce the % of generation on my SWG.
Well, I now have 80 degree water, with a FC level of 12!
It doesn't smell like chlorine, but is that going to be a skin irritant if I allow it to be used?
Today's #s
FC= 12
CC=0
PH=8.0 ( I added acid to target 7.4)
TA= 70
CH=350
CYA=45
Temp=80
What do you think??
Thanks in advance
MIKE