How much FC is safe?

Jul 2, 2012
48
Cupertino,CA
Hi folks.
I cranked-up the run-time on my pump, in order to get more hours of solar heat generation this week. My plan was to raise the temperature for a birthday party this weekend. (Tomorrow)
When I increased the run time from 4 hrs to 8 hrs, I didn't think to reduce the % of generation on my SWG.
Well, I now have 80 degree water, with a FC level of 12!

It doesn't smell like chlorine, but is that going to be a skin irritant if I allow it to be used?

Today's #s
FC= 12
CC=0
PH=8.0 ( I added acid to target 7.4)
TA= 70
CH=350
CYA=45
Temp=80

What do you think??

Thanks in advance

MIKE
 
You're set, then. Most of us raise the FC a couple points before we have a big crowd in the pool. Might I also suggest you brush thoroughly well in advance? Seems like swimmers hanging off the edges will discover all sorts of dust you didn;t know was there.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.