Hello, our Splash SuperPool is 10 years old. We noticed two years ago a small leak by one of the outlet ports. It became a bigger leak last year and we noted the port hold in the liner itself was gaping beyond the gaskets. We replaced the gaskets and put sealant around it. This spring when we removed the winter cover, the entire outlet assembly pulled away from the outside pool wall, revealing a lateral 2" tear coming from the outlet hole. We tried patching it, but the area is hardened and wrinkled and won't hold a patch.
I'm afraid we're going to have to drain the entire pool, disassemble it, lay the liner down flat, and patch it with some type of flat weight on both sides. However, with the material seeming to be hardened, I'm not confident it will hold. Any suggestions?
I'm afraid we're going to have to drain the entire pool, disassemble it, lay the liner down flat, and patch it with some type of flat weight on both sides. However, with the material seeming to be hardened, I'm not confident it will hold. Any suggestions?