I have been taking reading everyday to ensure that the Chlorine and PH are correct. A few days ago I started working on bringing the CYA up using granuals. I noticed the TA was lower than before probably due to the Muratic Acid pulling it down. I was using some pucks to maintain things for a bit but pulled those out as I decided I was better to control the chlorine and CYA myself.
PT = PebbleTec
FC: 2 - Just added 14oz to bring this up to 3. 1.5 to 3 recommending by PT
PH: 7.5 - Just added 14oz to bring this down to 7.2 as recommended by PT for the 1st 30 days. Been adding just about every day.
TA: 70 - Just added Baking Soda yesterday to bring this up from 40. Thinking to add a little more. 80 - 100 is recommended by PT
CYA: 30 - Still have the sock in the skimmer. May take it out and see what it reads after 24 hours from now. 30-50 is recommended by PT
CH: 400 -
After 30 days, will work toward turning on the Salt System.
I know that some the PT recommendations may not be quite the same as here but for right now, I want to follow their guidelines for warranty purposes.
I think all is well but figured I would post and get your feedback.
Thanks, I have learned so much and am continuing to do so.
PT = PebbleTec
FC: 2 - Just added 14oz to bring this up to 3. 1.5 to 3 recommending by PT
PH: 7.5 - Just added 14oz to bring this down to 7.2 as recommended by PT for the 1st 30 days. Been adding just about every day.
TA: 70 - Just added Baking Soda yesterday to bring this up from 40. Thinking to add a little more. 80 - 100 is recommended by PT
CYA: 30 - Still have the sock in the skimmer. May take it out and see what it reads after 24 hours from now. 30-50 is recommended by PT
CH: 400 -
After 30 days, will work toward turning on the Salt System.
I know that some the PT recommendations may not be quite the same as here but for right now, I want to follow their guidelines for warranty purposes.
I think all is well but figured I would post and get your feedback.
Thanks, I have learned so much and am continuing to do so.