OK, I had a PacFab Challenger and decided to buy a superpump. And as my life goes nothing is easy, but I will survive. My delima and I will probably get laughed at but, my Superpump is shorter to the ground as far as piping goes. What I am trying to do is sit the pump on something that will be sturdy enough, I need about and inch in height.
Trying to keep piping simple with pump
- Thread starter Bowlin
- Start date
If your pump is sitting directly on the concrete pad you can use a paver or a piece of treated board to raise it up to the level of the piping.
- Jul 3, 2013
- 9,028
- Pool Size
- 15000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool SJ-40
1 inch paver from lowes should work perfect for what you need 
I would get the 18x18 to give a nice sized footing for the pump..
I would get the 18x18 to give a nice sized footing for the pump..