As you know, I just adopted this "new" (new to me) pool with the house (and thereby, the "Pool-Idiot" nomenclature). And while waiting for the delivery of my new TF-100 test kit, I got the Salt level to 3200 PPM (from 2700). TF-100 just arrived. And I performed my first complete test. It appears that all test results are out of acceptable range(s) parameters, as follows:
- Active Cl - 5 (+) - K-1000 Basic Test
- pH - 8.2 (+) - K-1000 Basic Test
- FC - 8.0
- CC - 0.5
- TC - 8.5
- CYA- < 20
- CH - 100
- TA - 140
Other than turning down the Cl generator (or cutting pump / filtration time) to lower the chlorine levels, what chemistry level should I tackle first?
Thanks, as always, for your help.
- Active Cl - 5 (+) - K-1000 Basic Test
- pH - 8.2 (+) - K-1000 Basic Test
- FC - 8.0
- CC - 0.5
- TC - 8.5
- CYA- < 20
- CH - 100
- TA - 140
Other than turning down the Cl generator (or cutting pump / filtration time) to lower the chlorine levels, what chemistry level should I tackle first?
Thanks, as always, for your help.