Greetings TFP'ers! Quick question for y'all:
It's been almost 6 months since the re-plastering of my pool and I am still going through a significant amount of muriatic acid. Could the Pebble-Tec still be curing? Here are my numbers today:
In order to maintain pH, I need to add MA every 3-4 days even though I'm aerating the water very little. The spillover runs one hour per day with the VS pump at only 800rpm as not to create bubbles in the jets.
So - can I assume the plaster is still curing?
Thanks for the help!
- Flappy
It's been almost 6 months since the re-plastering of my pool and I am still going through a significant amount of muriatic acid. Could the Pebble-Tec still be curing? Here are my numbers today:
Cl: 6
CC: .5 (Palo Verde pollen - ugh)
TA: 60
pH: 7.6
CYA: 80
CH: 300
NaCl: 2800 (but the SWCG reports 3100 )
CC: .5 (Palo Verde pollen - ugh)
TA: 60
pH: 7.6
CYA: 80
CH: 300
NaCl: 2800 (but the SWCG reports 3100 )
In order to maintain pH, I need to add MA every 3-4 days even though I'm aerating the water very little. The spillover runs one hour per day with the VS pump at only 800rpm as not to create bubbles in the jets.
So - can I assume the plaster is still curing?
Thanks for the help!
- Flappy