Recently installed Hayward GLX-PCB-PRO Main PCB Replacement for Hayward Goldline ProLogic Automation and Chlorination. When I turned everything on, there is no reading or setting for anything salt related at all. Just pool and air temp, and when the pump should come on/off.
The reason I replaced the board is because I was off high amp errors. I hade the cell tested and it was fine. Since the board was 8 years old, I figured I would replace it and see if that would solve the problem. As stated above, there is no reading or setting for anything salt related at all.
Any assistance is appreciated.
- Ken
The reason I replaced the board is because I was off high amp errors. I hade the cell tested and it was fine. Since the board was 8 years old, I figured I would replace it and see if that would solve the problem. As stated above, there is no reading or setting for anything salt related at all.
Any assistance is appreciated.
- Ken