My pool build is getting ready to be under way. It will have a Paramount infloor cleaning system and the PB has spec'd a 2 HP single speed Jandy Stealth pump. He rationalizes the single speed pump by saying that the infloor won't be of any use at lower RPM's/flow rate, which makes sense. However, I think I am going to ask for the 2 speed pump to filter and chlorinate the pool at the lower speed (SWCG). The pool is ~13K gal, River-Rok, DE, RS pool controller, 400K BTU heater, 2 tanning ledge bubblers, and 2 small deck jets.
They use all Jandy equipment so I am pretty much locked into the Jandy brand.
Thoughts on going single or 2 speed Stealth pump for this setup? I'm thinking maybe a 4 hour run time at full speed for the infloor and maybe 4 hours at 1/2 speed for filter and SWCG. I think the RS controller is capable of split run time setup.
They use all Jandy equipment so I am pretty much locked into the Jandy brand.
Thoughts on going single or 2 speed Stealth pump for this setup? I'm thinking maybe a 4 hour run time at full speed for the infloor and maybe 4 hours at 1/2 speed for filter and SWCG. I think the RS controller is capable of split run time setup.