Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Before and after

  1. Back To Top    #1
    dmanb2b's Avatar
    Join Date
    Apr 2009

    Before and after

    Well the pool was installed two weeks ago and the pump was hooked up this past previously posted I went to work on reducing my we have had some rain lately, so that has helped with my CH. I'm trying to get ready for a SWG and here is where I'm at today

    Fill Water
    PH - 7.2
    CH - 470
    FC - 0
    TA - 360

    FC - 7.5
    CC 0
    TC 7.5
    PH 7.2 (I'll adjust to 7.5-7.6 when I add my 50ppm borates next week...have a 4 boxes of 20 mule/some MA and ordered 15lbs of boric acid from the chemistry store)
    TA 90 (Yay!!!...took quite a few gals of MA and a homemade aerator)
    CH 340 (Thank you rain water)
    CYA 30 (still disolving - added 3.5 lbs, 2.5 days ago
    Salt 3200
    Temp 65

    Any suggestions would be greatly appreciated!...thanks for everyones help....the water already seems nice and sparkly...can't wait to add borates
    24'x52" AGP (13,500 Gallons), Intex SWG, (2)Solar Bear 4x20 panels, Hayward S220T Filter, 1/2hp Pentair Superflo

    Pool School, TFTestKits, Pool Calculator

  2. Back To Top    #2
    Butterfly's Avatar
    Join Date
    May 2007
    South Carolina

    Re: Before and after

    You have been working!

    Just in case you haven't seen it, here's waterbears SWG tips:

    TFP Moderator TF100 Test Kit TF100 TestKit YouTube Channel PoolMath
    You're done SLAMing when:
    1)You lose 1ppm or less FC overnight, & 2)You have .5ppm CC's or less, & 3)your water is clear.

    ~ One should not use a sledge hammer to swat a mosquito. ~

    If you found TFP helpful and we saved you money ... Become a TFP Supporter!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts