Hi Folks,
I kinda took the winter off, and am now getting back into cleaning and testing my water.
When I tested 2 weeks ago, I had zero chlorine, but everything else was pretty close.
Today, I got the following results.
FC=3.6
CC=0
PH=7.8
TA=100
CH=400
CYA=48
Temp=68
SI=0.12
I am not positive with the CH reading though. Step 4 of the CH test, tells me to add R-0012 , one drop at a time, while swirling, until the water turns from red to blue.
I have NEVER been able to get a blue result.
I always give-up when the purple/violet color stops changing color as more drops are added.
Am I alone in this finding, or should I be able to get a true blue color?
Other than my CH question, I am pretty happy with the test results.
I will add a little acid to reduce the PH and help balance the SI.
Any other suggestions would be welcome.
Thanks,
Mike
I kinda took the winter off, and am now getting back into cleaning and testing my water.
When I tested 2 weeks ago, I had zero chlorine, but everything else was pretty close.
Today, I got the following results.
FC=3.6
CC=0
PH=7.8
TA=100
CH=400
CYA=48
Temp=68
SI=0.12
I am not positive with the CH reading though. Step 4 of the CH test, tells me to add R-0012 , one drop at a time, while swirling, until the water turns from red to blue.
I have NEVER been able to get a blue result.
I always give-up when the purple/violet color stops changing color as more drops are added.
Am I alone in this finding, or should I be able to get a true blue color?
Other than my CH question, I am pretty happy with the test results.
I will add a little acid to reduce the PH and help balance the SI.
Any other suggestions would be welcome.
Thanks,
Mike