I am currently doing the SLAM process on my pool. I had a lot of green algae when the cover was removed. I balanced the pool chemicals first. PH to 7.5, CYA to 70, TA to 70, hardness to 250(nothing added) and slowly brought chlorine level to 4.5 prior to SLAM. I put in roughly 15 gallons of bleached (approximately 30 hours ago) and attained a level of 28.0. 24 hour loss was a total of 3.0 and I added additional bleach to maintain the 28.0 level. I will be checking it until I have no noticeable loss and then give it the 24 hour period test. My question is, my pool has a lot of foam and the water is still very cloudy. I can hardly see the bottom in the shallow end. How long should I give this process until I start to see some improvement in both clarity and no foam?