Hi. New to this. I have a Pentair Minimax NT that has no power. There is one white wire that is cut with no corresponding wire to re-connect it to. The two remote wires are not connected to the board and are hanging loose. Is there a comprehensive wiring diagram or video to show me how to re-wire?
Pentair Minimax NT
- Thread starter Mikeneedshelp
- Start date
Thanks. One of the wires from the Hot Surface Ignitor (the one not going to the Ignition Module) and a white wire from the Power Switch and heading to the Terminal Block are both cut. Does anybody have pictures of their properly wired heater so I can compare? Thanks.
I re-wired the heater with a new $40 harness. Fired up without problems. If anybody needs help on this topic, let me know.