Good morning. Have been using TFP for almost 2 years with great success - This morning, my readings were
ph - 7.3
fc - 5
cc - 0
ta - 75
ch - 225
cya - 25 -30
My concern is that the poolmath page is giving me a corrosive reading, kind of scary. Yesterday my ph was 7.3 and I added 60 oz of washing soda per poolmath but as you can see there is no change. I am uncertain if the temperature input on poolmath is the water temperature you are testing at or the pool temperature. This morning my pool was 50 and I warmed the water to 72 before testing. Not sure what I should do at this point. It seems from playing with the inputs, raising the ph is my only choice. Appreciate any advice!!
ph - 7.3
fc - 5
cc - 0
ta - 75
ch - 225
cya - 25 -30
My concern is that the poolmath page is giving me a corrosive reading, kind of scary. Yesterday my ph was 7.3 and I added 60 oz of washing soda per poolmath but as you can see there is no change. I am uncertain if the temperature input on poolmath is the water temperature you are testing at or the pool temperature. This morning my pool was 50 and I warmed the water to 72 before testing. Not sure what I should do at this point. It seems from playing with the inputs, raising the ph is my only choice. Appreciate any advice!!