Floor drain cover

[dw9000]

I have twin drains in the floor of my pool, my pool depth is only about 5ft deep. These drains have a dome type head on them, and walking across the pool you could stub your toe on them, does anyone know if they make a lower profile cover that might work? Any other ideas?

 

[tim5055]

Pool and spa drain covers are designed to prevent entrapment. Unless you have two drains that relieve the pressure, a single drain probably needs to be bowed up or extremely large to make it harder to complete a seal over the top of it.

All Drain covers must be Virginia Graeme Baker Compliant

 

[bdavis466]

Ooops, I guess you are just looking for replacement drain covers. If that's the case, all of them protrude into the pool by 3/4"-1"

 

[gwegan]

As noted above, all the vgb compliant covers for twin suction drains protrude above the pool surface. If you want to cut the plaster and do a little surgery on the pool there are a varity of solutions (like troughs) that are vgb complaint and do not stick up.