I dont have the ability to put my pump on just circulation. Can I still do AA treatment with it filtering?
Ascorbic acid treatment
- Thread starter mehyler
- Start date
- May 23, 2015
- 24,381
- Pool Size
- 16000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Does your pool have any kind of heater attached to it? You want to bypass anything that is metallic. Your cartridge filter should be fine.
Sent from my iPhone using Tapatalk,16k gal SWG pool (All Pentair), QuadDE100 Filter, Taylor K-2006
Sent from my iPhone using Tapatalk,16k gal SWG pool (All Pentair), QuadDE100 Filter, Taylor K-2006
No heater attached. Just cartridge filter and pump
- - - Updated - - -
And the SWG Cell
- - - Updated - - -
And the SWG Cell
Technically, the issue is the low pH and its effects on a copper heat exchanger. The pH isn't actually terribly low so the advice is conservative. Also, if one has a titanium or cupro-nickel alloy heat exchanger there is less risk. In your case with no heater there should be no problem at all.
Similar threads
