Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Freeze protection mode

  1. Back To Top    #1

    Talking Freeze protection mode

    We are starting to get into cold nights and the pool and spa are kicking in to freeze protect mode.

    We have had the pool for about 10 years and I've never noticed the blower coming on during this mode. Could be just that: I've just not noticed before. Also, the light comes on in the spa during freeze protect. We do have a pool cleaning company that cleans our filter and also does a weekly clean. I'm thinking they may have changed the settings? They, naturally, want to charge $85 to diagnose.

    Thanks for any help you can give.

    25,000 gallon saltwater pool with raised spa, Hayward de filter 6020, 2 hp pump, aqualogic PS-8 Controls - Dallas, TX

  2. Back To Top    #2


    TFP Guide

    Join Date
    Jul 2015
    Location
    Central Valley CA
    Posts
    1,073

    Re: Freeze protection mode

    Looks like you have to go into the setup for each device you do not want protected and disable it. Take a look in the manual starting around page 26 https://www.hayward-pool.com/pdf/man...stallation.pdf
    12,300 Gallon, IG PebbleFina, 3 ft sheer, 2 Jandy nicheless LED lights, Jandy Pro 1.5HP VS pump (A.O. Smith Motor), PB4-60 Booster pump, Polaris 280, Jandy cv340 cartridge filter, Zodiac Z4 control panel W/iAquaLink, Stenner pumps for chlorine & MA connected to WiOn WiFi switches, TF-100. You can support TFP with AmazonSmile just click the link!

  3. Back To Top    #3

    Re: Freeze protection mode

    Thank you!
    25,000 gallon saltwater pool with raised spa, Hayward de filter 6020, 2 hp pump, aqualogic PS-8 Controls - Dallas, TX

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •