- Oct 25, 2015
- 5,128
- Pool Size
- 25000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Folks,
I'm using the TF-100 kit and when testing TA I notice the blue reagent (R-0011L) is very difficult to squeeze a drop out. It's so hard to squeeze I'm afraid I'm going to pop out the insert in the top. Is this normal or should I run a needle down the top to clear it?
Thanks!
Chris
I'm using the TF-100 kit and when testing TA I notice the blue reagent (R-0011L) is very difficult to squeeze a drop out. It's so hard to squeeze I'm afraid I'm going to pop out the insert in the top. Is this normal or should I run a needle down the top to clear it?
Thanks!
Chris