I just completed my weekly level check (K2006) and came up with the following results:
FC 7
PH 7.4
TA 50
CH 180
CYA 80
Salt 3500 ppm
Plugging my numbers into the PoolMatch calculator I come up with a SI -1.12. Reading the Taylor manual, this is bad. Now that the water temperatures have dropped that number has gotten out of hand. Should I be concerned with the SI?
Thanks!
FC 7
PH 7.4
TA 50
CH 180
CYA 80
Salt 3500 ppm
Plugging my numbers into the PoolMatch calculator I come up with a SI -1.12. Reading the Taylor manual, this is bad. Now that the water temperatures have dropped that number has gotten out of hand. Should I be concerned with the SI?
Thanks!
Last edited: